Allen-Bradley 1738-ADNX Uživatelský manuál Strana 16

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 132
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 15
Publication 1768-UM001C-EN-P - November 2007
16 Directly Connect to a Controller Via the Serial Port
Connect a Controller Via
the Serial Port
Channel 0 on a CompactLogix controller is fully isolated and does not need a
separate isolation device.
To connect a serial cable, perform this procedure.
1. Obtain a serial cable.
2. Connect the cable to your controller and workstation.
If you Then
Make your own cable a. Limit the length to 15.2 m (50 ft).
b. Wire the connectors.
c. Attach the shield to both connectors.
Do not make your own cable Obtain one of these serial cables:
1747-CP3
1756-CP3
Workstation Controller
1 DCD
2 RDX
3 TXD
4 DTR
COMMON
6 DSR
7 RTS
8 CTS
9
1 DCD
2 RDX
3 TXD
4 DTR
COMMON
6 DSR
7 RTS
8 CTS
9
Zobrazit stránku 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 131 132

Komentáře k této Příručce

Žádné komentáře